htw saar QR-encoded URL
Back to Main Page Choose Module Version:
emphasize objectives XML-Code

flag


Manufacturing Process Technology (with Lab Course)

Module name (EN):
Name of module in study programme. It should be precise and clear.
Manufacturing Process Technology (with Lab Course)
Degree programme:
Study Programme with validity of corresponding study regulations containing this module.
Production Informatics, Bachelor, ASPO 01.10.2023
Module code: PRI-TFL
SAP-Submodule-No.:
The exam administration creates a SAP-Submodule-No for every exam type in every module. The SAP-Submodule-No is equal for the same module in different study programs.
P241-0286, P241-0287
Hours per semester week / Teaching method:
The count of hours per week is a combination of lecture (V for German Vorlesung), exercise (U for Übung), practice (P) oder project (PA). For example a course of the form 2V+2U has 2 hours of lecture and 2 hours of exercise per week.
3V+1U+1LU (5 hours per week)
ECTS credits:
European Credit Transfer System. Points for successful completion of a course. Each ECTS point represents a workload of 30 hours.
5
Semester: 2
Mandatory course: yes
Language of instruction:
German
Assessment:
Written exam 120 min. (graded)
Lab experiment (evaluated)

[updated 05.11.2020]
Applicability / Curricular relevance:
All study programs (with year of the version of study regulations) containing the course.

MAB_19_A_2.02.TFL (P241-0286, P241-0287) Mechanical and Process Engineering, Bachelor, ASPO 01.10.2019 , semester 2, mandatory course
PRI-TFL (P241-0286, P241-0287) Production Informatics, Bachelor, ASPO 01.10.2023 , semester 2, mandatory course
Workload:
Workload of student for successfully completing the course. Each ECTS credit represents 30 working hours. These are the combined effort of face-to-face time, post-processing the subject of the lecture, exercises and preparation for the exam.

The total workload is distributed on the semester (01.04.-30.09. during the summer term, 01.10.-31.03. during the winter term).
75 class hours (= 56.25 clock hours) over a 15-week period.
The total student study time is 150 hours (equivalent to 5 ECTS credits).
There are therefore 93.75 hours available for class preparation and follow-up work and exam preparation.
Recommended prerequisites (modules):
None.
Recommended as prerequisite for:
PRI-CAX CAX Basics and Applications
PRI-CAXP CAX-Based Production
PRI-PUQ Production and Quality Management


[updated 21.03.2024]
Module coordinator:
Prof. Dr. Jürgen Griebsch
Lecturer: Prof. Dr. Jürgen Griebsch

[updated 07.08.2019]
Learning outcomes:
After successfully completing this course, students will be familiar with important manufacturing processes and the machine tools used.
They will be familiar with the characteristics and possible applications of the manufacturing processes according to DIN 8550.
Students will be able to select a process based on technical criteria for a production task and by weighing up the advantages and disadvantages.
They will be able to outline manufacturing chains for simple tasks.
Students will be familiar with the practical application of selected manufacturing processes according to DIN 8550.    

[updated 05.11.2020]
Module content:
The quality and efficiency of industrial production depends on choosing the right manufacturing process and understanding that process. That is why knowledge about the various technologies is one of a production engineers important tools.
Basic components of manufacturing processes according to DIN 8550 are:
- Primary processing (e.g. casting)
- Forming
- Cutting
- Coating
- Modifying
We will also discuss joining to a limited extent, but it is one of the main focuses of the 5th semester in the lecture "Joining Techniques with Integrated Lab Course".
  
The content of the course is based on a roughly defined industrial process and will prepare students for the production engineering lab that accompanies the lecture.
 
The lecture will be combined with smaller practical exercises where students can work on topics, present them briefly and then discussion them.
 


[updated 05.11.2020]
Teaching methods/Media:
- Lecture with exercises and calculations on the blackboard
- Lab - Practical course

[updated 05.11.2020]
Recommended or required reading:
Spur, G.; Handbuch Fertigungstechnik in 5 Bänden; Hanser Verlag, 2016
 
Fritz, A.-H.; Fertigungstechnik; Springer Verlag, 2018; ISBN: 978-3-662-56535-3
 
Gebhardt, A.; Additive Fertigungsverfahren; Hanser Verlag, 2016; ISBN: 978-3-446-44539-0
 
Geiger, Walter / Kotte, Willi; "Handbuch Qualität, Grundlagen und Elemente des Qualitätsmanagements: Systeme _  Perspektiven"; ISBN: 978-3-8348-0273-6
 
Keferstein, Claus P. / Dutschke, Wolfgang; "Fertigungsmesstechnik Praxisorientierte Grundlagen, moderne Messverfahren"; ISBN: 978-3-8351-0150-0
 
Tschätsch, Heinz; "Praxis der Zerspantechnik - Verfahren, Werkzeuge,  Strahlquellen, Systeme, Fertigungsverfahren; ISBN: 978-3-8351-0005-3
 
Ralf Berning; "Grundlagen der Produktion: Produktionsplanung und Beschaffungsmanagement (Taschenbuch)";  ISBN: 978-3464495131
 
König, Klocke; "Fertigungsverfahren 1-5: Fertigungsverfahren 1. Drehen, Fräsen, Bohren: Drehen, Frasen, Bohren: Bd 1 (Gebundene Ausgabe)"; ISBN: 978-3540234586
 
Fritz, Schulze; "Fertigungstechnik (VDI)"; ISBN: 978-3540766957
 
Westkämper, Engelbert / Warnecke, Hans-Jürgen; "Einführung in die Fertigungstechnik"; ISBN: 978-3-8351-0110-4
 
Habenicht, Gerd; "Kleben - erfolgreich und fehlerfrei - Handwerk, Praktiker, Ausbildung, Industrie"; ISBN: 978-3-8348-0019-0
 
Hügel, Helmut / Graf, Thomas; "Laser in der Fertigung (Arbeitstitel)-  Strahlquellen, Systeme, Fertigungsverfahren; ISBN: 978-3-8351-0005-3
 
Ralf Berning; "Grundlagen der Produktion: Produktionsplanung und Beschaffungsmanagement (Taschenbuch)";  ISBN: 978-3464495131
 
König, Klocke; "Fertigungsverfahren 1-5: Fertigungsverfahren 1. Drehen, Fräsen, Bohren: Drehen, Frasen, Bohren: Bd 1 (Gebundene Ausgabe)"; ISBN: 978-3540234586
 
 
 


[updated 05.11.2020]
[Fri Apr 19 16:52:51 CEST 2024, CKEY=mfn, BKEY=pri, CID=PRI-TFL, LANGUAGE=en, DATE=19.04.2024]