htw saar QR-encoded URL
Back to Main Page Choose Module Version:
emphasize objectives XML-Code

flag flag


Fluid Dynamics

Module name (EN):
Name of module in study programme. It should be precise and clear.
Fluid Dynamics
Degree programme:
Study Programme with validity of corresponding study regulations containing this module.
Industrial Engineering, Bachelor, ASPO 01.10.2021
Module code: WIB21-WPM-T-101
Hours per semester week / Teaching method:
The count of hours per week is a combination of lecture (V for German Vorlesung), exercise (U for Übung), practice (P) oder project (PA). For example a course of the form 2V+2U has 2 hours of lecture and 2 hours of exercise per week.
2V+2U (4 hours per week)
ECTS credits:
European Credit Transfer System. Points for successful completion of a course. Each ECTS point represents a workload of 30 hours.
5
Semester: 5
Mandatory course: no
Language of instruction:
English
Assessment:
Written exam

[updated 14.03.2018]
Exam recurrence:
The information regarding exam recurrence is found within the exam policy of the study programme (ASPO).
Applicability / Curricular relevance:
All study programs (with year of the version of study regulations) containing the course.

WIBASc-525-625-Ing21 (P450-0039) Industrial Engineering, Bachelor, ASPO 01.10.2013 , semester 5, optional course, general subject
WIB21-WPM-T-101 Industrial Engineering, Bachelor, ASPO 01.10.2021 , semester 5, optional course, general subject

Suitable for exchange students (learning agreement)
Workload:
Workload of student for successfully completing the course. Each ECTS credit represents 30 working hours. These are the combined effort of face-to-face time, post-processing the subject of the lecture, exercises and preparation for the exam.

The total workload is distributed on the semester (01.04.-30.09. during the summer term, 01.10.-31.03. during the winter term).
60 class hours (= 45 clock hours) over a 15-week period.
The total student study time is 150 hours (equivalent to 5 ECTS credits).
There are therefore 105 hours available for class preparation and follow-up work and exam preparation.
Recommended prerequisites (modules):
None.
Recommended as prerequisite for:
Module coordinator:
Prof. Dr. Frank Ulrich Rückert
Lecturer: Prof. Dr. Frank Ulrich Rückert

[updated 09.02.2022]
Learning outcomes:
Topics:
 After successfully completing this module, students will know the basics of classical fluid dynamics theory.
 - Students will be able to plan an innovative aircraft geometry in teams
 - The fluid flow simulation of the prototype will be done using the ANSYS Workbench (CFX)
 - Students will be able to identify problems in this area and formulate tasks independently
 - Students will have had their first introductory training in working with the 3D computational fluid dynamics program ANSYS Workbench (CFX)
 
The main goal of this module is to teach students to classify the costs and benefits of a commercial flow simulation and to successfully assign and delegate tasks.


[updated 13.09.2018]
Module content:
Group work in project teams:
 - Definition of the project structure and roles
 - Planning tasks
 
The classical flow theory:
 - Presentation of different wing profiles (NACA)
 - Profile flow
 - Euler and Bernoulli equation
 - Mass maintenance
 - Impulse maintenance; Navier-Stokes equations
 - Two equations turbulence models
 - Loss calculation, flow breakage
 
Basics of the ANSYS Workbench (CFX):
 - Creation of a parameterized flow geometry
 - Discretization of the geometry with grating grids
 - Numerical solution of partial differential equations
 - Visualization and interpretation of 3D flow results
 - Documentation of the simulation results (Excel, Powerpoint)
 
Practical work:
 - Generation of a prototype with a 3-D printer
 - Preparation of an experimental plan (DOE)
 - Conducting pilot tests in the wind tunnel
 - Documentation of test results (Excel, Powerpoint)
 
Presentation and discussion of the results in a lecture with the group
 


[updated 14.03.2018]
Teaching methods/Media:
 - Lecture with beamer
 - Implementation of practical flow simulations with the ANSYS Workbench (CFX)
 - Supervised computer exercises in the PC pool
 - Presentation of solutions for the other participants
 - Creation of a PowerPoint presentations and youtube video dipicting the results obtained

[updated 14.03.2018]
Recommended or required reading:
 - Cengel, Yunus A.; Cimbala, John M.: "Fluid Mechanics Fundamentals and Applications"; Mc Graw Hill; Higher Education; 2010
 - Peric, M., Ferziger, J. H.: "Computational Methods for Fluid Dynamics"; Springer-Verlag; 2004
 - Rückert, Frank U.: "A short introduction to CFD" (english language); htw saar; 2017
 - Chant, Christopher: "Flugzeug-Prototypen. Vom Senkrechtstarter zum Stealth-Bomber"; Stuttgart, Motorbuch, 1992
 - Strybny, Jan: "Ohne Panik - Strömungsmechanik Lernbuch zur Prüfungsvorbereitung"; vieweg Verlag, 2003
 - Siekmann, Helmut: "Strömungslehre - Grundlagen"; Springer Verlag, 2000
 - Kalide, Wolfgang; "Einführung in die Technische Strömungslehre"; Hanser Verlag, 1984
 - Bohl, Willi: "Technische Strömungslehre"; Vogel Buchverlag, 2002
 - Noll, Berthold: "Numerische Strömungsmechanik - Grundlagen"; Springer-Verlag, 1993
 - Spurk, Joseph H.: "Strömungslehre - Einführung in die Theorie und Praxis"; Springer-Verlag, 1992
 - Sigloch, Herbert: "Technische Fluidmechanik"; Springer-Verlag, 2007

[updated 14.03.2018]
[Sun Apr 21 01:52:39 CEST 2024, CKEY=wfd, BKEY=wi3, CID=WIB21-WPM-T-101, LANGUAGE=en, DATE=21.04.2024]